PRODUCT TESTING SOLUTION ACCORDING TO NATIONAL & INTERNATIONAL STANDARD
PIPE & FITTINGS TESTING SOLUTION
- HDPE PIPE TESTING AS PER IS : 4984 – 2016 & IS : 14333
- SPRINKLER PIPE TESTING AS PER IS: 14151 / IS : 17425
- R-PVC PIPE TESTING AS PER IS: 4985 : 2000
- PLB DUCT TESTING As per DOT Standard
- LLDPE DRIP PIPE TESTING AS PER IS : 12786 / 13488
- ONLINE EMITTERS / DRIPPERS AS PER IS : 13487
- CASING PIPE TESTING AS PER IS : 12818
- MDPE PIPE TESTING AS PER IS: 14885 / ISO 4437
- CONDUIT SYSTEMS FOR ELECTRICAL INSTALLATION AS PER IS : 14930:2001 (PART-1 & 2)
- FLEXIBLE PVC HOSE TESTING AS PER IS:15265
- PVC SEWERAGE PIPE TESTING AS PER IS : 15328
- C-PVC PIPE TESTING AS PER IS : 15778
- C-PVC FITTINGS AS PER IS-17546 / ASTM D 2846
- u – PVC PIPE TESTING AS PER ASTM D 1785
- u – PVC FITTING TESTING AS PER ASTM D 2467
- PPR PIPE TESTING AS PER IS :15801
- ORIENTED UNPLASTICIZED POLYVINYL CHLORIDE ( PVC – O ) PIPES FOR WATER SUPPLY AS PER IS:16647
- ELECTRICAL CONDUITS TESTING AS PER IS : 9537
- RIGID NON METALLIC CONDUITS AS PER IS 3419
- PIPES FOR SOIL AND WASTE DISCHARGE SYSTEM FOR INSIDE AND OUTSIDE BUILDINGS INCLUDING VENTILATION AND RAIN WATER SYSTEM ( SWR PIPES ) TESTING AS PER IS 13592: 2013
- FITTINGS FOR SOIL AND WASTE DISCHARGE SYSTEM FOR INSIDE AND OUTSIDE BUILDINGS INCLUDING VENTILATION AND RAIN WATER SYSTEM ( SWR FITTINGS ) TESTING AS PER IS 14735
- STRUCTURED WALL PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE
- TESTING AS PER IS : 16098:2013 (PART-1 & 2)
- PLASTIC BIB TAPS, PILLAR TAPS , ANGLE VALVES AND STOP VALVES FOR HOT AND COLD WATER SERVICES AS PER IS: 9763 : 2000
- POLYETHYLENE – ALUMINIUM – POLYETHYLENE COMPOSITE PRESSURE PIPES FOR HOT AND COLD WATER SUPPLIES AS PER IS : 15450 : 2022
- GLASS FIBRE REINFORCED POLYMER (GFRP) TESTING AS PER IS 18256:2023
- HOT PRESS MOULDED THERMOSETTING GLASS FIBRE REINFORCED POLYESTER RESIN (GRP ) SECTIONAL
- WATER STORAGE TANKS AS PER IS: 14399 (PART 1) : 1996
- POLYETHYLENE CONTAINERS FOR THE TRANSPORT OF MATERIAL IS : 6312 – 1994
- UPVC PROFILES FOR WINDOWS AND DOORS AS PER IS 17953:2023
- ELE. CONDUIT TRUNKING PIPE / SYSTEM – FOR CABLE MANAGEMENT AS PER IS-16205:2018 PART-1 & 24
- NON-PRESSURE UNDERGROUND DRAINAGE & SEWERAGE – PVC-U , PP & PE - FOR ANCILLARY FITTINGS AND SHALLOW CHAMBERS AS PER BS EN 13598‑1
- NON-PRESSURE UNDERGROUND DRAINAGE & SEWERAGE – PVC-U , PP & PE - FOR MANHOLES & INSPECTION CHAMBERS IN TRAFFIC AREA & DEEP UNDERGROUND INSTALLATION AS PER BS EN 13598‑2
OTHER TESTING SOLUTION
- ROTATIONAL MOULDED WATERTANKS TESTING AS PER IS : 12701
- MULTILAYER CO-EXTRUDED FILM TESTING AS PER IS: 2508 / IS: 2530
- POLYETHYLENE MULCH FILM FOR AGRICULTURE AND HORTICULTURE AS PER IS 17216 : 2019
- TEXTILE -TARPAULIN TESTING AS PER IS:7903-2005 / 706 (P-8) / 15351
- WOVEN FABRIC TESTING
- SOLVENT CEMENT JOINTS FOR WATER SUPPLIERS TESTING IS:7834
- PLYWOOD, B-BOARD & FLUSH DOOR TESTING APPLICATION AS PER IS-303, IS-710, IS-1659 & IS-2202
